Sigelei 19b from www.celticvapes.co.uk

Comments

  1. Thanks mate for the review.
    Here in US we are getting 19b's recently. I bought one. It came with the previous round cap with the spring instead of the magnet. Here the 'nZonic' heads are sold separately. The ones sold here seem to have the magnet. Interesting.

    Anyways. Why do you think it fires better this time? There doesn't seem to be any changes to the button itself. The reason it was misfiring was that the bottom post was not in contact with the tube unless the button cap was actually touching the lock ring. Do you think they changed the tolerances a bit so that is the case whenever the post touches the battery it is always in contact with the tube?

    ReplyDelete
    Replies
    1. I think its just the battery now making a far better contact and better springs :)

      Delete
  2. The nzonic clone cap that i have has the magnet too not the spring like what you have todd.. Is there any way to just swap the original 19 cap spring to the nzonic cap?

    ReplyDelete
    Replies
    1. I gave my 19s away so can't answer that one, internal threading is the same!

      Delete
  3. Todd what were you thinking about using to grind the 510 connection down with to get an atty to sit flush on the device. I'm sure I want to do the same, but I'm am inexperienced with modding sevices and so I am affraid of damaging the top cap or connection

    ReplyDelete
    Replies
    1. Probably use by dremel but you are right, need to be oh so careful, would be so ready to make a mistake, could use sand paper and just take your time, less chance of damage :)

      Delete
  4. I have original #20 and putting nipple top battery in upside down (positive to switch) has resulted in better firing and less travel of button.Don't know of voltage drop.The Screwdriver mk2 uses this arrangement. thanks for tip Todd.

    ReplyDelete
  5. Correction I meant the Sigelei #19 original not the #20 which is a different mod altogether.

    ReplyDelete
  6. Hi Todd... Thanks for your reviews: great work. I've just got my 19b and it seems the kick works fine in it,after several tries. I've recenter the spring in the top cap,put the tube with air holes on top.Then i've install the kick in the tube right on the spring and put my battery with positive on the kick and negative on the switch. It seems it works great.
    I've quit smoking cigarettes since about three weeks now but today i'm crazy about vapes and mods: thanks to your videos.
    Ps: sorry for my poor English,i'm French... Don't hate me...!

    ReplyDelete
    Replies
    1. Great, glad it's working for you :)

      As for hating the French, in Paris every year, fav city in the world.

      Delete

Post a Comment